Bunny Basket Sampler

Address-Book

Please change your bookmarks and readers to see all the newest posts – and all the old ones too!

http://impiehattiebea.com/blog/

bs4

bs1

bs2

bs5

by

bs3

tsk3

pgs3

I have a new Basket Sampler offering and a few more of an old one. This little cutie is from Homespun Elegance. I have kits for this at the webshop, they include design, linen, thread pack (including some fuzzy alpaca for the tail), pretty fabric for the back, fluffy trim, and hand-dyed perle for the bow.

I’ve added a few new bunnies to my decor, there was a great sale on Easter things last week and I was happy to add two new bunnies to my collection at such a savings, I’m also stitching another little bunny freebie that I’ll tell you all about soon. I’m thinking of making up some kits for that as well.

Also, due to popular demand, I am able to offer 3 more Tall Sheep Basket Sampler kits! I still have 6 Sampler of the Month Kits – A Prairie Girl’s Sampler available and over at the Only While They Last page I have a couple of reduced offerings… 1 Love Thy Neighbor design w/threads available, and a few February Calender Girls, I’ve reduced these to help them find a happy home!

I’m spending my days in the sewing room, it’s taken some time to get back up to speed with Impie, Hattie & Bea sewing I’m embarrassed to say, but it feels good to be productive in the sewing room again. I still squeeze in a bit of knitting in the car and once it’s too late for stitching for these tired old eyes.

:0)

make your own!

ptut1

ptut2

ptut3

ptut

ptut4

ptut5

ptut6

ptut7

ptut8

ptut9

ptut10

ptut11

ptut12

ptut13

ptut14

ptut15

Back with another pillowcase and as requested, my method in detail.

For starters….I do NOT wash the fabric before I make my pillow cases. I’ve generally used high quality quilt shop fabric for these. There is a bit of shrinkage when I do wash them (before I use them) but not enough to matter. Since I don’t know what fabrics you may be using, I can’t say if shrinkage will be an issue for you. That being said, the fabric used in this tutorial is less than high quality, I’ll let you know what happens after I wash it :0)

You need to look at your fabric and decide if you are working with an all-over print or a one-way print. I’ve shown a sample of each. For an all-over print I use the ‘store fold’ for the edge of my fabric. I’m not uber-worried about being thread perfect straight and with/against grain on these either. These are basic fold and sew pillowcases, but nice ones :0). With a one-way print you may need to open up your fabric and fold it the other way to have the print look right. You can see if I went with the ‘store fold’ the ladies on the pink/yellow fabric would be sideways. Most fabric on the bolt (quilt fabric that is) is about 44 inches wide and you buy it by the yard. If you are using the store fold a yard is enough for a standard pillow, you will need an eighth or quarter yard more if you have to fold it the other way.

You want to start with a piece of fabric that is 40 x 36, 36 is your pillowcase length. Use the store fold or fold your fabric in half so that you are working on a 20×36 rectangle WRONG sides together (pretty side out). This fits a standard pillow, like the one shown. They may be a bit snug if your extra firm pillow is brand new however, mine are not. You could always use a store bought pillowcase you own and like size wise as a guide for fabric dimensions, just add in your seam allowances.

NOW – with your 20×36 triangle which has the pretty sides facing out, sew a scant 1/4 seam starting at the left side of the folded edge sewing down a short side, hopefully my picture here explains this better. Sew down, make a turn at the corner and sew across the long open side also. You will leave one short side open. Trim this seam allowance about in half, be careful not to nick your stitches.

Turn the case inside out now. I use a giant knitting needle to poke out the corners. you can press it now to get that seam edge nice and flat but I just use a pin to pull it out flat and then pin it. Do this down the short and across the long sewn side, still leaving one end open. Now sew again using a full 1/4 seam allowance on the pinned short end and long bottom leaving one end open. This nicely hides all the raw edges on your seams. Leave your case inside out.

You now want to press about 3/8 to a 1/2 inch of fabric along the open side of your case wrong sides together (see the picture), cat on ironing board is optional. I like my finished pillowcase to be somewhere around 30 inches in length so you will want to press your fabric over again for the hem allowance. This hem is a nice place to use decorative stitches on your machine and a pretty colored thread. My machine goes straight forward and backward and that’s it so I didn’t get fancy :0)

I hope this will be a useful starting place for making good use of pretty fabric that may be hanging around at your house.

:0)

PS

This is just how I made these. It’s not THE only way. If you have a better way or think my way is bad, that’s fine, really, you needn’t write me about it. I’m all about reducing negativity just now :0)

PPS

I have some fabrics for pillowcases to the webshop!

more scenes from the sewing room

sroom4

sroom3

sroom2

another

sroom1

I’ve been pretty busy with fabric and buttons, lots and lots of buttons. I used 90 buttons today. Tracking down buttons has become a family past-time, we are all on a button quest. I love using this little divided dish I picked up at the dollar bin in Target to sort my buttons, it’s cute, it’s festive, it’s handy.

I’ve been getting another shipment of Impie, Hattie & Bea things off to Hoffmans. You can see the fabric for the second edition of the Pumpkin 4 Sale workbooks here. I’ve had another bale of batting delivered, here it sits in my living room, I’ll haul it up to the sewing room when I finish posting here, I’ve used one like this up since August 21st!

I do love this little dish!

:0)

PS – a few orders have been delayed due to a wait for ‘Bean Sprout’ threads. I do believe they are back in stock!

a quick hello

betty 1

betty 2

betty

I’m still here, I am not getting off to a very good blogging start in 2011 but I should have more time shortly. I do have lots to show and tell, very soon!

In the meantime, I’ve had a few sweet things in the mail lately. One very handy delivery is this new pressing board that I’ve been using for the past two days. It’s called Steady Betty and so far I’m very happy with it. I love the little tag. You can find out more about this product here. I’ve been thinking of making something for a pressing surface for the sewing room and feel really happy with this solution. I have the 15 x 24 size board.

We’ve had flu here. So far just Kellen and Jerry, hoping that will be it. The weather has been very nice and I have to say I can hardly believe how fast January has flown by!

Be back soon.

:0)